 |
| Tritium in a Process |
|
 |
Tyne Engineering is the leader in the real time measurement of Tritium within process lines. Our slim in-line detector heads can be easily integrated into any system. The detection chambers are TSSA approved pressure vessels that can with stand up to 150 psig and 350 °C while maintaining a Helium Leak Tightness to better then 1 x 10-9 atm cc/sec. |
| |
| The detector heads can be mounted up to 300’ away from the controller or Data Acquisition System. This remote installation ability coupled with the optional purging system means that the detectors can be safely installed in a Hydrogen Environment meeting all Explosion Proof codes. |
|
| With the highest sensitivity at 1 µCi/m3 , maximum range of 1 kCi/m3 and a flow rate of up to 1.5 L/sec these monitors will fit just about any application. |
|
 |
 |
| Multi Range |
Single Range |
|
| Real Time Measurement |
 |
|
| Direct In-Line Installation |
|
|
| Small Footprint |
|
|
| Electro-polished Interior |
|
|
| Max of 150 PSIG |
|
|
| Max of 350 °C |
|
|
| 1 x 10-9 Helium Leak Tight |
|
|
| 1 L/sec flow rate |
|
|
| Explosion Proof Add-on |
|
|
| Multi Ranging |
|
|
| Single Designable Range |
|
|
| Auto Zeroing |
|
|
| 0 – 10 V Analog Out |
|
|
| 4-20 mA Analog Out |
|
|
| Digital Range Indication |
|
|
| Dual Set Point Alarms |
|
|
Local Alarm,
Visual and Audible |
|
|
Remote Alarm,
30 VAC/DC 1A Relay Output
|
|
|
| RS232 Output |
|
|
Dual Channel for 2 detectors
Or Gamma compensation
|
|
|
|
|
